No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Authentication by User Name and Password

Authentication by User Name and Password

Enter the user name and password before running a command.

The default user name is admin.

The default password is Admin@storage.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./ --op queryNvdimmRecovery -id 0 -nodeMgrIp
[Fri Aug 21 09:34:16 CST 2015] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Media recovery type : force_replace
[Fri Aug 21 10:02:32 CST 2015] DswareTool operation end.

If environment variables are not configured, the command can be used without password encryption. In this case, the echo y|sh command is executed to avoid the prompted high-risk warning. As a result, unpredicted system exceptions may occur.

Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4861

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next