No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Attaching the iSCSI Volumes and a LUN ID to an iSCSI Host

Attaching the iSCSI Volumes and a LUN ID to an iSCSI Host

Run the following command to attach the iSCSI volumes and a LUN ID to an iSCSI host:

sh --op addLunsToHostWithLunId -hostName hostName -lunName lunName1,lunName2,...



Specifies an executable program for the tool.

--op addLunsToHostWithLunId

Attaches the iSCSI volumes and a LUN ID to an iSCSI host.


Specifies the name of the iSCSI host to which the iSCSI volume is attached.


Specifies the name of the iSCSI volume. If multiple iSCSI volumes exist, separate them with commas (,).


The LUN ID is detected and attached by the VBS process. Therefore, the command does not include the LUN ID information.

An example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./ --op addLunsToHostWithLunId -hostName host_01 -lunName test01
[Tue Sep 20 11:49:48 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Tue Sep 20 11:49:55 CST 2016] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4774

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next