No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an FSA Log Threshold

Configuring an FSA Log Threshold

Run the following command to configure an FSA log threshold:

sh /opt/dsware/client/bin/dswareTool.sh --op Service nameCmd -subOp SetLogThreshold -fsaIp fsaIp -logThreshold logThreshold

Parameter

Description

/opt/dsware/client/bin/dswareTool.sh

Specifies an executable program for the tool.

--op Service nameCmd

Self-defined based on the service.

For the replication service, the value is drCmd.

For the dgw service, the value is dgwCmd.

-subOp SetLogThreshold

Configures an FSA log threshold.

-fsaIp ip1,ip2,ip3

Specifies the IP address of the FSA node where the log threshold is to be configured.

-logThreshold logThreshold

Specifies the log threshold, for example -logThreshold 20.

An IPv4 example is provided as follows:

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp SetLogThreshold -fsaIp 192.168.5.14 -logThreshold 20
[Tue Sep 19 15:40:50 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
result    detail                         globalErrorList
------------------------------------------------------------
0         successIpList=[192.168.5.14]    --
------------------------------------------------------------
Total records : 1.
[Tue Sep 19 15:41:13 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@KD182250132182:~> sh /opt/dsware/client/bin/dswareTool.sh --op drCmd -subOp SetLogThreshold -fsaIp 2016:8:40:160:c13:0:169:32 -logThreshold 20
[Tue Sep 19 15:40:50 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
result    detail                         globalErrorList
------------------------------------------------------------
0         successIpList=[2016:8:40:160:c13:0:169:32]    --
------------------------------------------------------------
Total records : 1.
[Tue Sep 19 15:41:13 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4694

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next