No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Interface Configuration Guidelines

Interface Configuration Guidelines

To use the public interfaces of the DR service, configure the cli.xml and deploy.xml files for the service.

For example, run the sh /opt/dsware/client/bin/ --op Service name Cmd -subOp Help command for the help interface.

Configure the cli.xml file as follows:

<cmd name="Help" flowName="Help">
<item name="result" valueType="uint64" id="4095"/>

Configure the deploy.xml file as follows:

<flow name="Help">
<step name="begin" handler="PrepareParam" nextStep="Help"></step>
<step name="Help" handler="Help" nextStep=""></step>

Public interfaces are used for development and coding. For details about command usages, see the command usage guide of the DR service. For example, see the FusionStorage Block HyperMetro CLI Command Usage Guide for the HyperMetro service and see the FusionStorage Block dgw CLI Command Usage Guide for the dgw service.

Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4714

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next