No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Status of Monitoring on the Network Suboptimal State

Querying the Status of Monitoring on the Network Suboptimal State

Run the following command to check whether the network suboptimal state of a specified node is monitored:

./dswareTool.sh --op queryNetworkSubhealthSwitch -ip ip1-ip2,ip3,...

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op queryNetworkSubhealthSwitch

Queries the status of monitoring on the network suboptimal state

-ip ip1-ip2,ip3,...

Specifies the management IP addresses of the nodes to be queried. The value can be a single IP address or an IP address segment, for example, 172.21.36.21-172.21.36.22.

An IPv4 example is provided as follows:

dsware@FSM121:/opt/dsware/client/bin> sh dswareTool.sh --op queryNetworkSubhealthSwitch -ip 172.21.36.21-172.21.36.22
[Fri Apr 15 16:35:39 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
NodeMgrIp         Switch            
------------------------------------
172.21.36.22    open              
172.21.36.21    open

An IPv6 example is provided as follows:

dsware@FSM121:/opt/dsware/client/bin> sh dswareTool.sh --op queryNetworkSubhealthSwitch -ip 2016:8:40:160:c13:0:169:32-2016:8:40:160:c13:0:169:36
[Fri Apr 15 16:35:39 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
NodeMgrIp         Switch            
------------------------------------
2016:8:40:160:c13:0:169:32   open              
2016:8:40:160:c13:0:169:36   open
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4801

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next