No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Information About Network Ports on IB Network Adapters

Querying Information About Network Ports on IB Network Adapters

Run the following command to query information about network ports on IB network adapters:

sh dswareTool.sh --op syncIbPortInfo -nodeIps (optional) ip1-ip2,ip3...

Parameter

Description

dswareTool.sh

Specifies an executable program for the tool.

--op syncIbPortInfo

Queries information about network ports on IB network adapters.

-nodeIps ip1-ip2,ip3

Specifies the management IP addresses of the Agent nodes on which the IB network adapters whose network port information you want to query are located. This parameter is optional. If the parameter is left blank, the system will query network port information about IB network adapters on all Agent nodes.

An IPv4 example is provided as follows:

dsware@SZX1000380274:~> sh dswareTool.sh --op syncIbPortInfo
[Fri Sep 7 10:36:15 +0430 2018] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0

NodeMgrIp                               QueryStatus         ErrorCode           Desc
--------------------------------------------------------------------------------------------------------------------------------------------
192.168.182.8                              Success
192.168.182.4                              Success
192.168.182.6                              Success
--------------------------------------------------------------------------------------------------------------------------------------------

[Fri Sep 7 10:36:25 +0430 2018] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@SZX1000380274:~> sh dswareTool.sh --op syncIbPortInfo
[Fri Sep 7 10:36:15 +0430 2018] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0

NodeMgrIp                               QueryStatus         ErrorCode           Desc
--------------------------------------------------------------------------------------------------------------------------------------------
2016:8:40:160:c13:0:169:32                              Success
2016:8:40:160:c13:0:169:34                              Success
2016:8:40:160:c13:0:169:36                              Success
--------------------------------------------------------------------------------------------------------------------------------------------

[Fri Sep 7 10:36:25 +0430 2018] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4655

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next