No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Notifying the FSM Node to Generate the Master Key

Notifying the FSM Node to Generate the Master Key

Run the following command to notify the FSM node to generate the master key:

./dswareTool.sh --op genKmcMK -domainName FSM_ENCRYPT/FSA_ENCRYPT/OMA_ENCRYPT/OMA_TRANSFER/EVS_ENCRYPT/VBS_TRANSFER/VBS_ENCRYPT

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op genKmcMK

Specifies the command used to generate the master key.

-domainName

Specifies the domain where the generated key belongs. The value can be FSM_ENCRYPT, FSA_ENCRYPT, OMA_ENCRYPT, OMA_TRANSFER, EVS_ENCRYPT, VBS_TRANSFER, or VBS_ENCRYPT.

An example is provided as follows:

dsware@SZX1000099371:/opt/dsware/client/bin> sh dswareTool.sh --op genKmcMK -domainName FSM_ENCRYPT
[Wed Nov 2 11:19:59 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
The new information of MasterKey is list:
domainName: FSM_ENCRYPT
keyId: 3
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5883

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next