No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing the Disk Slot Number and ESN Allocated by Specified Heterogeneous Storage Media

Clearing the Disk Slot Number and ESN Allocated by Specified Heterogeneous Storage Media

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to delete the disk slot number and equipment serial number (ESN) allocated by specified heterogeneous storage media:

Only ESN and disk slot number which is greater than 73 allocated by specified heterogeneous storage can be cleared.

./dswareTool.sh --op clearDiskEsn -ip ip -diskName diskName1,diskName2,...

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op clearDiskEsn

Clears the disk slot number and ESN allocated by specified heterogeneous storage media.

-ip ip

Specifies the IP address of the node to be cleared, for example, 172.28.0.2.

-diskName diskName1,diskName2,...

Specifies the disk names to be cleared,

for example, sdc,sdd,sde,sdf,sdg,sdh,sdi.

An IPv4 example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op clearDiskEsn -ip 172.28.0.2 -diskName sdc,ssd,sde,sdf,sdg,sdh,sdi
This operation is high risk,please input y to continue:y
[Tue Nov 3 17:18:38 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
[Tue Nov 3 17:18:40 CST 2015] DswareTool operation end.

An IPv6 example is provided as follows:

dsware@FSM:/opt/dsware/client/bin> ./dswareTool.sh --op clearDiskEsn -ip 2016:8:40:160:c13:0:169:34 -diskName sdc,ssd,sde,sdf,sdg,sdh,sdi
This operation is high risk,please input y to continue:y
[Tue Nov 3 17:18:38 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
[Tue Nov 3 17:18:40 CST 2015] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4762

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next