No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Updating the OMM Key

Updating the OMM Key

Run the following command to update the OMM key:

./ --op updateOMMKey -keyType RK/MK




Specifies an executable program for the tool.

--op updateOMMKey

Updates the OMM key.

-keyType RK/MK

Specifies the type of the key to be updated. The value can be RK (indicates the OMM root key) or MK (indicates the OMM master key).

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh --op updateOMMKey -keyType RK
This operation is high risk,please input y to continue:y
[Thu Nov 10 17:17:35 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Thu Nov 10 17:17:48 CST 2016] DswareTool operation end.
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4745

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next