No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Server IP Addresses in Batches

Setting Server IP Addresses in Batches

Run the following command to set server IP addresses in batches:

sh dswareTool.sh --op batchSetServerIp -f filePath

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op batchSetServerIp

Sets server IP addresses in batches.

-f filePath

Specifies the directory storing the IP information file, for example, /opt/dsware/client/conf/ip_config.xml.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> sh dswareTool.sh  --op batchSetServerIp -f /opt/dsware/client/conf/ip_config.xml
[Wed Nov 18 16:15:06 CST 2015] DswareTool operation start.
Operation finish successfully. Result Code:0
taskId: 6
[Wed Nov 18 16:15:08 CST 2015] DswareTool operation end.

NOTE:

You must modify the configuration file (/opt/dsware/client/conf/ip_config.xml) based on the actual condition before running this command.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4883

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next