No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Lazyloading Feature

Configuring the Lazyloading Feature

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to configuring the lazyloading feature:

./dswareTool.sh --op configLazyloadingSwitch -type open/close

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op configLazyloadingSwitch

Configures the lazyloading feature.

-type open/close

Specifies whether to enable or disable lazyloading. The value can be open (enables lazyloading) or close (disables lazyloading).

An example is provided as follows:

dsware@SZX1000292850:~> sh /opt/dsware/client/bin/dswareTool.sh --op configLazyloadingSwitch -type open
[Sat Aug 26 11:00:32 CST 2017] DswareTool operation start.
Operation finish successfully. Result Code:0
[Sat Aug 26 11:00:35 CST 2017] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4713

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next