No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Performing a Check Before the Rollback

Performing a Check Before the Rollback

Run the following command to check whether any resources related with the new feature exist in the system before the rollback:

./dswareTool.sh --op clientRollbackCheck -type 1,2,3,4,5

In the command, the value of parameter type can be as follows:

1: specifies to check whether encrypted volumes exist.

2: specifies to check whether lazyloading resources exist.

3: specifies to clear the lazyloading resources.

4: specifies to check whether HyperMetro volumes exist.

5: checks whether there is a delay in loading internal image resources.

An example is provided as follows:

dsware@FSM01:/opt/dsware/client/bin> ./dswareTool.sh --op clientRollbackCheck -type 1
[Sun Jan 15 16:04:59 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4660

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next