No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Tool Authentication Guide

Tool Authentication Guide

Authentication is required before you use the CLI commands of this tool to ensure security. You can use either of the following authentication modes.

In the following sections, both of the authentication modes are involved. If neither Enter User Name nor Enter Password is displayed in an example, authentication by configuring environment variables is used.

Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5964

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next