No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying the Method of Restoring the Faulty SSD or SSD Card

Querying the Method of Restoring the Faulty SSD or SSD Card

Run the following command to query the method of restoring the faulty SSD or SSD card:

./dswareTool.sh --op querySSDRecovery -id poolId -esn esn -nodeMgrIp nodeMgrIp -type main_storage/cache

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op querySSDRecovery

Queries the method of restoring the faulty SSD or SSD card.

-id poolId

Specifies the ID of the storage pool where the faulty SSD or SSD card locates, for example, 0.

-esn esn

Specifies the ESN of the faulty SSD or SSD card.

-nodeMgrIp nodeMgrIp

Specifies the management IP address of the node where the faulty SSD or SSD card locates, for example, 172.21.36.21.

-type main_storage/cache

Specifies the role of the SSD or SSD card. The value can be main_storage or cache.

An IPv4 example is provided as follows:

[dsware@FSM01 bin]$ sh /opt/dsware/client/bin/dswareTool.sh --op querySSDRecovery -id 1 -esn ECE1PBB03PL4 -nodeMgrIp 10.90.211.32 -type main_storage
[Thu Aug 4 12:52:31 CST 2016] DswareTool operation start.
time task has started!
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Media recovery type : normal
[Thu Aug 4 12:52:41 CST 2016] DswareTool operation end.

An IPv6 example is provided as follows:

[dsware@FSM01 bin]$ sh /opt/dsware/client/bin/dswareTool.sh --op querySSDRecovery -id 1 -esn ECE1PBB03PL4 -nodeMgrIp 2016:8:40:160:c13:0:169:34 -type main_storage
[Thu Aug 4 12:52:31 CST 2016] DswareTool operation start.
time task has started!
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
Media recovery type : normal
[Thu Aug 4 12:52:41 CST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4827

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next