No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Changing VSC Parameter Values

Changing VSC Parameter Values

This operation is risky. You must confirm whether to continue to execute the command.

Run the following command to change VSC parameter values:

./dswareTool.sh --op modifyVscPara -para paraName1:value1,paraName2:value2 -ip(optional) ip1,ip2,ip3...

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op modifyVscPara

Changes VSC parameter values.

-para paraName1:value1,paraName2:value2

Specifies the names and new values of the parameters.

-ip(optional) ip1,ip2,ip3...

Specifies the IP addresses of the nodes for which VSC parameter values are to be changed, for example, 192.168.60.51,192.168.60.52,192.168.60.53. This parameter is optional.

An IPv4 example is provided as follows:

sh dswareTool.sh --op modifyVscPara -para vsc_merge_block_size:55 -ip 192.168.60.51
This operation is high risk,please input y to continue:y
[Wed Jul 5 06:08:31 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
The count of successful nodes is 1.

The count of failed nodes is 0.

[Wed Jul 5 06:09:00 CST 2017] DswareTool operation end.

An IPv6 example is provided as follows:

sh dswareTool.sh --op modifyVscPara -para vsc_merge_block_size:55 -ip 2016:8:40:160:c13:0:169:32
This operation is high risk,please input y to continue:y
[Wed Jul 5 06:08:31 CST 2017] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
The count of successful nodes is 1.

The count of failed nodes is 0.

[Wed Jul 5 06:09:00 CST 2017] DswareTool operation end.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4693

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next