No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 Block Storage DSware Tool Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Re-encrypting the Confidential Data Using the Non-KMC Method

Re-encrypting the Confidential Data Using the Non-KMC Method

Run the following command to re-encrypt the confidential data using the non-key management CBB (KMC) method:


You can run this command to re-encrypt the confidential data again using the non-KMC method. The re-encrypted data can be used during the rollback of FusionStorage Block V100R006C00RC2.

./ --op recryptSecData




Specifies an executable program for the tool.

--op recryptSecData

Re-encrypts the confidential data.

An example is provided as follows:

dsware@KD182249181115:/opt/dsware/client/bin> ./ --op recryptSecData
This operation is high risk,please input y to continue:y
[Wed Dec 28 10:20:12 CST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Operation finish successfully. Result Code:0
[Wed Dec 28 10:20:19 CST 2016] DswareTool operation end.
Updated: 2019-08-19

Document ID: EDOC1100081411

Views: 5895

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next