No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 DSware Tool Command Reference 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the KMS Information

Setting the KMS Information

Run the following command to set the key management system (KMS) information:

NOTE:

Enter the password of the EVS account as prompted.

./dswareTool.sh --op setKMSInfo -KMSScenario publiccloud -KMSType HW -KMSAddress KMSAddress -KMSPort KMSPort -IAMAddress IAMAddress -IAMPort IAMPort -EVSAccount EVSAccount

Parameter

Description

./dswareTool.sh

Specifies an executable program for the tool.

--op setKMSInfo

Sets the KMS information.

-KMSScenario publiccloud

Specifies the application scenario. Currently, only publiccloud is supported.

-KMSType HW

Specifies the type of the KMS. Only Huawei KMS is supported currently.

-KMSAddress KMSAddress

Specifies the address of the KMS.

-KMSPort KMSPort

Specifies the port number of the KMS.

-IAMAddress IAMAddress

Specifies the address of the IAM server.

-IAMPort IAMPort

Specifies the port number of the IAM server.

-EVSAccount EVSAccount

Specifies the EVS account.

An example is provided as follows:

[dsware@FSM01 bin]$ sh dswareTool.sh --op setKMSInfo -KMSScenario publiccloud -KMSType HW -KMSAddress KMSAddress.com -KMSPort 123 -IAMAddress IAMAddress.com -IAMPort 1234 -EVSAccount EVSAccount
This operation is high risk,please input y to continue:y
[Tue Dec 20 02:25:36 ACWST 2016] DswareTool operation start.
Enter User Name:admin
Enter Password :
Enter EVSPassword :
Retype EVSPassword :
Operation finish successfully. Result Code:0
task id: 2
[Tue Dec 20 02:25:49 ACWST 2016] DswareTool operation end.
Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081411

Views: 4828

Downloads: 3

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next