No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Event Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0xEE0090004 The Iowait CPU Usage Per Core Is Too High

0xEE0090004 The Iowait CPU Usage Per Core Is Too High

Description

When the iowait CPU usage per core exceeds 90%, this alarm is reported. When the iowait CPU usage per core is lower than 70%, this alarm is automatically cleared.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0xEE0090004

Alarm

Warning

Yes

Impact on the System

Services may be interrupted.

Possible Causes

The disk I/O processing time is too long.

Procedure

  1. On the alarm management page, check whether the PlogServer In Suboptimal State alarm exists on the node where this alarm is generated.
    1. If yes=> Step2.
    2. If no=> Step3.
  2. Wait for half an hour and check whether the alarm is cleared.
    1. If yesno further action is required.
    2. If no=> Step3.
  3. Contact technical support engineers.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081413

Views: 2863

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next