No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Event Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
0x1E0090004 Device Fan Is Faulty

0x1E0090004 Device Fan Is Faulty

Description

This alarm is reported when a fan of a device fails.

Applicable Model

Applicable to all models.

Attribute

ID

Event Type

Event Level

Automatically Cleared

0x1E0090004

Alarm

Major

Yes

Impact on the System

The system may be overheated and fail consequently.

Possible Causes

  • The fan is not detected.
  • The cable connection of the fan is abnormal.
  • The fan module is faulty.

Procedure

  1. Locate the device based on the rack ID, enclosure ID, and fan ID provided in alarm details.

    NOTE: Data on an offline node can only be reconstructed manually.

  2. Possible cause: The fan is not detected.
    1. Check whether the fan can be detected.
    2. Replace a fan module. CAUTION: This operation is a high-risk operation. Before the operation, contact technical support.
    3. Power on the device. Check whether the alarm is cleared.
      • If yes=> no further action is required.
      • If no=> Step4.
  3. Possible cause: The fan module is faulty.
    1. Remove the fan module.CAUTION: This operation is a high-risk operation. Before the operation, contact technical support.
    2. Install the fan module. CAUTION: This operation is a high-risk operation. Before the operation, contact technical support.
    3. Power on the device. Check whether the alarm is cleared.
      • If yes=> no further action is required.
      • If no=> 3.4.
    4. Replace the fan module. CAUTION: This operation is a high-risk operation. Before the operation, contact technical support.
    5. Power on the device. Check whether the alarm is cleared.
      • If yes=> no further action is required.
      • If no=> Step4.
  4. Contact technical support.
Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081413

Views: 2857

Downloads: 2

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next