No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Locating L-shaped Fixed Guide Rails and Floating Nuts for KVMs and Switches

Locating L-shaped Fixed Guide Rails and Floating Nuts for KVMs and Switches

If L-shaped fixed guide rails and floating nuts have been installed in a Huawei cabinet, ensure that the positions of the L-shaped fixed guide rails and floating nuts are consistent with the planned positions.

Prerequisites

A cabinet has been installed.

Procedure

  1. Check the installation positions of the L-shaped fixed guide rails and floating nuts for KVMs and switches, as shown in Figure 8-2.

    Figure 8-2 Installation positions of L-shaped fixed guide rails and floating nuts for KVMs and switches

    Non-standard L-shaped fixed guide rails are used for 1 U devices such as KVMs and switches. Unlike standard L-shaped fixed guide rails, non-standard L-shaped fixed guide rails have holes on them.

Download
Updated: 2019-11-14

Document ID: EDOC1100081415

Views: 6978

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next