No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 Block Storage Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Alarm and Safety Symbols

Alarm and Safety Symbols

When installing or maintaining equipment, follow the precautions indicated by alarm and safety symbols to prevent personal injury and equipment damage.

Table 1-1 lists the alarm and safety symbols labeled on equipment.

Table 1-1 Alarm and safety symbols labeled on equipment



ESD Protection Symbol

Indicates that you must wear an electrostatic discharge (ESD) wrist strap or glove to avoid personal injury and equipment damage caused by electrostatic discharge.

Cabinet Grounding Symbol

Indicates the position of a grounding point.

Disk Swap and Install Warning Symbol

Indicates that you should be cautious when you swap, install, or pull out a disk.

Updated: 2019-11-14

Document ID: EDOC1100081415

Views: 8171

Downloads: 15

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next