No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing a PDU

Installing a PDU

A power distribution unit (PDU) must be installed to provide power for the components in a cabinet. The PDU is vertically installed on the PDU installation plate on both sides at the back of the cabinet.

Prerequisites

  • Cabinet installation has been completed.
  • All required tools have been prepared, including Phillips screwdrivers, M6 screws, ladders, and protective gloves.

Procedure

  1. Wear protective gloves.
  2. Fit the upper and lower round tabs on the PDU rear panel into pear-shaped holes on the PDU installation plate and push them downwards to lock the PDU.

    Figure 6-7 Installing a PDU

    It is recommended that two people collaborate to install the PDU so that PDU tabs can be easily oriented to the installation holes.

  3. Use the Phillips screwdriver and M6 screws to secure the PDU to the cabinet.
  4. Repeat Step 2 to install another PDU on the other side of the cabinet.
Download
Updated: 2019-11-14

Document ID: EDOC1100081415

Views: 9833

Downloads: 15

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next