No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Intra-Cabinet Components

Checking Intra-Cabinet Components

After installing all intra-cabinet components, check whether they are properly installed.

Prerequisites

All intra-cabinet components have been installed.

Procedure

  1. Check that components are installed to the correct positions as specified by engineering design documents.
  2. Check that panel screws of components are all present and fastened.
  3. Check that component exteriors are free of damage, stain, or paint peeling off.
  4. Check that labels attached to components are secured and free of peeling off.
  5. Check that ESNs attached to components are secured and free of peeling off.
  6. Check that filler panels are installed for empty disk slots if there is any.
Download
Updated: 2019-11-14

Document ID: EDOC1100081415

Views: 9758

Downloads: 15

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next