No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Hardware Installation Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking Other Devices

Checking Other Devices

This section describes how to check installation of other devices.

Prerequisites

All devices have been installed.

Procedure

  1. Check whether all labels are clean, legible, arranged in order, and attached to correct positions.
  2. Make sure that no construction remnants, such as cable ties, cable ends, or desiccant bags, are found under cable troughs and racks, on top of cable trays and racks, or under the raised floor around racks.
  3. Make sure that waste is removed out of the equipment room, and useful articles are stored orderly in the equipment room.
Download
Updated: 2019-11-14

Document ID: EDOC1100081415

Views: 9709

Downloads: 15

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next