No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Parts Replacement 05

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Chassis Cover of a 5288 V5 36-Slot Node or TaiShan 5280 V2 36-Slot Node

Installing the Chassis Cover of a 5288 V5 36-Slot Node or TaiShan 5280 V2 36-Slot Node

  1. Place the chassis cover horizontally, align it with the fixing slots on both side panels of the chassis, and close the handle, as shown in steps 1 and 2 in Figure 27-17.

    Figure 27-17 Installing a chassis cover

  2. Tighten the screw using a flat-head screwdriver to secure the handle, as shown in step 3 in Figure 27-17.
Translation
Download
Updated: 2019-10-18

Document ID: EDOC1100081420

Views: 6509

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next