No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionStorage 8.0.0 Block Storage Parts Replacement 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing a 5288 V5 36-Slot Node or TaiShan 5280 V2 36-Slot Node from Its Cabinet

Removing a 5288 V5 36-Slot Node or TaiShan 5280 V2 36-Slot Node from Its Cabinet

  1. Power off the faulty node.

    Log in to DeviceManager and choose Cluster > Hardware. In the faulty node area, click and select Power Off.

    If you cannot access the faulty node by DeviceManager, use the KVM to log in to the faulty node as user root, and run the poweroff command to power off the node.

  2. Remove all power cables and external signal cables.
  3. Loosen the captive screws on the panel using a Phillips screwdriver, as shown in step 1 in Figure 27-9. Slowly pull out the storage node along the guide rails, as shown in step 2 in Figure 27-9.

    Figure 27-9 Pulling out a storage node

  4. Pull up the release buttons. Arrange at least four persons to lift the storage node from both sides and remove it along with the inner rails, as shown in Figure 27-10.

    Figure 27-10 Removing a storage node from holding rails

  5. Place the removed storage node on an ESD table.
  6. Raise one end of the baffle plates until they are away from the bolts, as shown in step 1 in Figure 27-11. Push the inner rails forward until they cannot move any further, and remove the inner rails, as shown in step 2 in Figure 27-11.

    Figure 27-11 Removing inner rails

Updated: 2019-09-19

Document ID: EDOC1100081420

Views: 6019

Downloads: 4

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next