No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Product Description 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Standards

Hardware Standards

This section describes the hardware standards Huawei servers comply with. If servers of other vendors are used, see their standards compliance.

Protocol standards

FusionStorage complies with the protocol standards listed in Table 7-1.

Table 7-1 Protocol standards

Name

Standard No.

IPMI 2.0

Intelligent Platform Management Interface Specification Second Generation v2.0, Document Revision 1.0, February 12, 2004

SMBIOS

System Management BIOS (SMBIOS) Reference Specification, Version 2.5, Status: Final Standard, September 5, 2006

SAS 2.1

Information technology - Serial Attached SCSI - 2

ACPI

Advanced Configuration and Power Interface Specification, Revision 3.0, September 2, 2004

Safety and EMC Standards

FusionStorage complies with the safety and EMC standards listed in Table 7-2.

Table 7-2 Safety and EMC standards

Name

Standard No.

IT equipment safety standard

GB4943–2001

International Electrotechnical Commission (IEC) standard

IEC 60950-1

North America safety standard

UL 60950–1

US EMC standard

FCC, 47 CFR Part 15, Subpart B

European safety standard

EN 60950–1

European EMC standard

EN 55024: 1998+A1+A2

Industry Standards

FusionStorage complies with the industry standards listed in Table 7-3.

Table 7-3 Industry standards

Name

Standard No.

Ethernet standard

IEEE 802.3

Fast Ethernet standard

IEEE 802.3u

GE standard

IEEE 802.3z

IEEE Standard Test Access Port and Boundary-Scan Architecture

IEEE 1149.1-2001

Failure mode and effects analysis (FMEA) process

IEC 812

Reliability, maintainability, and availability standard

IEC 863

Environmental protection standard

REACH/RoHS/WEEE

Certifications

FusionStorage has attained the certifications listed in Table 7-4.

Table 7-4 Certifications

Certification

Description

CB

The CB Scheme is managed by the Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE). IECEE member agencies in each country test the safety of electrical equipment based on IEC standards. The test results (CB test reports and certificates) are recognized by IECEE member bodies. The CB Scheme aims to reduce trade barriers caused by different approval or certification standards in different countries.

CCC

China Compulsory Certification (CCC) enforces compulsory certification on products related to human health and safety, animal and plant life and health, environmental protection, and public safety.

CE

Conformité Européenne (CE) refers to the certification required for products to be sold in Europe. Products marked CE comply with the EMC regulations (2004/108/EC) and low voltage regulations (2006/95/EC) released by the European Commission.

C-Tick

C-Tick signifies compliance with the EMC standards of Australia Community Association (ACA). Currently, C-Tick is only applicable to products with electromagnetic interference and became effective from January 1, 1999.

FCC

Federal Communications Commission (FCC) certification guarantees that equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

GOST

Russia national standard certification requiring CE or CB.

IC

Industry Canada (IC) sets up the test standards for analog and digital terminal devices and specifies the EMC certificates that all imported electronic products must obtain.

REACH

Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) is a regulation of the European Union (EU), adopted to protect human health and the environment from the risks posed by chemicals.

RoHS

Restriction of the Use of Certain Hazardous Substances (RoHS) was published in 2003 by EU. It manages environmental impact caused by electrical and electronic products when produced and scrapped. RoHS specifies the maximum number of hazardous substances allowed during device production.

SASO

Saudi Arabian Standards Organization (SASO), authorized by the Saudi Arabian government, organizes and implements International Conformity Certification Program (ICCP) for market access. Products imported into Saudi Arabia must meet SASO's market access requirements and obtain the COC certificates before customs clearance.

SONCAP

As required by Standards Organization of Nigeria (SON), products exported to Nigeria must be certified by SON Conformity Assessment Programme (SONCAP) before customs clearance.

UL

Underwriters Laboratories (UL) is an American non-profit product safety testing and certification organization.

VCCI

Voluntary Control Council for Interference (VCCI) is an EMC certification trademark registered to Japan.

WEEE

Waste Electrical and Electronic Equipment (WEEE) Regulation is an EU directive. Electrical and electronic products sold in the EU must comply with this directive and bear the symbol of a crossed-out wheelie bin.

Multi-Country Certification

The certification is applicable to Saudi Arabia, Nigeria, Tanzania, Uganda, Kuwait, Algeria, Botswana, Qatar, and Egypt.

NOM

Norma Oficial Mexicana (NOM) is the name of each of a series of official compulsory standards and regulations for diverse activities in Mexico. According to the List of Mandatory Mexican Standards Enforced at the Border (NAFTA doc. 9012), general electrical and electronic equipment (EEE) must obtain the NOM certificate except that the equipment is proved to be highly specialized equipment (HSE) or the input power of the equipment does not exceed 24 V (rms). Three organizations can grant such a certificate: UL, NYCE, and ANCE.

China Environmental Labeling

To obtain certificates from China Environmental Labeling, products must meet the requirements for energy saving, environmental protection, safety, and EMC from design, production, use, waste disposal, reclamation, to recycling (from cradle to cradle).

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081421

Views: 1649

Downloads: 32

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next