No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Product Description 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TaiShan 5280 V2 36-Slot Node

TaiShan 5280 V2 36-Slot Node

Function

A TaiShan 5280 V2 36-slot node is a 4-socket rack server developed based on Huawei Kunpeng 920 processor. It is applicable to Internet, distributed storage, and cloud computing, and features high-performance computing, large-capacity storage, low power consumption, easy management, and easy deployment.

Appearance

Entire device

Figure A-31 shows the appearance of a TaiShan 5280 V2 36-slot node.

Figure A-31 Appearance

Front view

Figure A-32 shows the front panel of a TaiShan 5280 V2 36-slot node.

Figure A-32 Front panel

1

UID button/indicator

2

Health indicator

3

Power button/indicator

4

Fault diagnosis LED

5

Flexible NIC indicators (1 and 2)

6

Disk

7

VGA port

8

USB 3.0 port

9

Label, including the ESN label

-

-

The front panel of a TaiShan 5280 V2 36-slot node provides 24 service disk slots numbered 0 to 23 from top to bottom and from left to right, as shown in Figure A-33.

Figure A-33 Disk slots on the front panel of a TaiShan 5280 V2 36-slot node

Rear view

Figure A-34 shows the rear panel of a TaiShan 5280 V2 36-slot node.

NOTE:

This section uses the 10GE NIC as an example.

Figure A-34 Rear panel

1

Flexible NIC (with four GE electrical ports or four 25GE optical ports)

2

I/O module 1

3

Management network port

4

Serial port

5

VGA port

6

USB 3.0 port

7

I/O module 2

8

Flexible NIC (with four GE electrical ports or four 25GE optical ports)

9

PSU

10

PSU socket

11

I/O module 3

12

Disk

13

Power indicator

14

Link status indicator/Data transmission status indicator for an optical port

15

Optical port data transmission rate indicator

16

UID indicator

17

Management network port link status indicator

18

Management network port data transmission status indicator

19

GE electrical port link status indicator

20

GE electrical port data transmission status indicator

Figure A-35 shows disk slots on the rear panel of a TaiShan 5280 V2 36-slot node.

Figure A-35 Disk slots on the rear panel of a TaiShan 5280 V2 36-slot node

Ports

Table A-19 and Table A-20 show ports provided by a TaiShan 5280 V2 36-slot node.

Table A-19 Ports on the front panel

Port

Type

Quantity

Description

USB port

USB 3.0

2

Connects to a USB device.

NOTE:

Before connecting to a USB device, ensure that the USB device operates properly. A node may operate abnormally if it is connected to a faulty USB device.

Table A-20 Ports on the rear panel

Port

Type

Quantity

Description

PSU socket

-

2

Connects to a power supply.

GE electrical port

RJ45

4/8

The mainboard provides GE electrical ports. A maximum of eight GE electrical ports can be provided through two flexible NICs.

25GE optical port

SFP+

4/8

The mainboard provides 25GE optical ports. A maximum of eight 25GE optical ports can be provided through two flexible NICs.

NOTE:

25GE optical ports support 10GE autonegotiation through optical modules with different rates.

USB port

USB 3.0

2

Connects to a USB device.

NOTE:

Before connecting to a USB device, ensure that the USB device operates properly. A node may operate abnormally if it is connected to a faulty USB device.

Management network port

RJ45

1

Functions as a 1000 Mbit/s Ethernet port, used for node management.

VGA port

DB15

1

Connects to a terminal, such as a monitor or KVM.

Serial port

RJ45

1

Functions as the system serial port by default. You can set it as the iBMC serial port by using the iBMC command. This port is used for debugging.

Physical Structure

Figure A-36 shows components of a TaiShan 5280 V2 36-slot node.

Figure A-36 Components

1

I/O module 1

2

I/O module 2

3

Rear disks

4

Rear disk backplane

5

PSU

6

Chassis

7

I/O module 3

8

Supercapacitor

9

Air duct

10

Front disk backplane

11

Fan module bracket

12

Fan module

13

Front disks

14

CMA

15

Heat sink

16

DIMM

17

RAID controller card

18

Mainboard

19

Flexible NIC

20

iBMC card

21

Flexible NIC

Technical Specifications

Table A-21 lists the technical specifications of a TaiShan 5280 V2 36-slot node.

Table A-21 Technical specifications

Category

Item

Specifications

Physical specifications

Dimensions (H x W x D)

175 mm (4 U, 1 U = 44.45 mm) x 447 mm x 790 mm

Weight

  • Net weight: 65 kg
  • Packaging weight: 15 kg

Environmental specifications

Operating temperature

–5°C to +40°C

Operating humidity

8% RH to 90% RH

Power supply specifications

220 V AC and 240 V high-voltage DC (adaptive)

  • AC: 200 V AC to 240 V AC (50 Hz or 60 Hz)
  • High-voltage DC: 192 V to 288 V

Power consumption specifications

Maximum power consumption

1250 W

Translation
Download
Updated: 2019-08-19

Document ID: EDOC1100081421

Views: 2107

Downloads: 42

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next