No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Block Storage Security Configuration Guide 06

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Importing and Activating Certificates

Importing and Activating Certificates

If the storage system communicates with external devices, it is recommended that you use certificate verification to improve service security. You are advised to replace the default security certificates with certificates obtained from a formal organization and promptly replace the certificates that are about to expire. This section describes how to import and activate certificates.

Procedure

  1. Log in to DeviceManager.
  2. Choose Settings > Certificate Management.
  3. Locate the row that contains the desired certificate, click , and select Import and Activate. The Import and Activate dialog box is displayed.

    Select a service certificate, CA certificate, and private key file as required.

  4. Click OK.

    The system displays a message indicating that the certificates are imported and activated successfully. The imported certificates are displayed in the certificate list.

Translation
Download
Updated: 2019-11-14

Document ID: EDOC1100081422

Views: 1611

Downloads: 3

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next