No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Software Installation Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Modifying the I/O Suspension Timeout Interval

Modifying the I/O Suspension Timeout Interval

Scenarios

If the system is planned to use the ASM Mirror function of the Oracle database, you need to change the I/O suspension timeout interval to prevent normal services from being interrupted when a fault occurs in the system.

Procedure

  1. Use PuTTY to log in to the management node as user dsware using a management plane floating IP address.

    The default password of user dsware is IaaS@OS-CLOUD9!.

    Use the public and private key pairs for login authentication. For details, see Using PuTTY to Log In to a Node in Key Pair Authentication Mode.

  2. Run the cd /opt/dsware/client/bin command to enter the specified path.
  3. Run the sh dswareTool.sh --op modifySysPara -para g_dsware_io_hang_timeout:90 command to change the I/O suspension timeout interval to 90 seconds.

    NOTE:
    • When the Oracle database is used, change the value of asm_hbeatiowait to 150 seconds.
    • Since the system security is hardened, you need to enter the user name and password for authentication after running the dswareTool command. The default user name and password are cmdadmin and IaaS@PORTAL-CLOUD9!, respectively.
    • If you do not want to enter the user name and password for authentication every time upon the execution of the dswareTool command, you can import environmental variables for authentication. For details, see Configuring Environment Variables for Authentication.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081424

Views: 1844

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next