No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Software Installation Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Server IP Address

Configuring a Server IP Address

Before installing FusionStorage, you need to configure the storage network IP address of a compute node, and management network IP addresses of a management node and a storage node.

Configuring the IP Address of a Compute Node

When VBS is deployed on a compute node, you need to configure a storage network IP address for the compute node to communicate with the storage node. You are advised to use the bond network port mode to aggregate network ports to improve network bandwidth and reliability. For details, see Configuring a Server IP Address.

Configuring IP Addresses for Management Nodes and Storage Nodes

Before installing FusionStorage, you need to configure management network IP addresses for management nodes and storage nodes. The management network does not require network port aggregation in bond network port mode. For details, see Configuring a Server IP Address.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081424

Views: 1830

Downloads: 8

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next