No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Software Installation Guide 02

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the Server Using PuTTY (Network Port Mode)

Logging In to the Server Using PuTTY (Network Port Mode)

Prerequisites

  • The management terminal communicates with the management network port of the storage node properly.
  • PuTTY has been installed on the management terminal.
    NOTE:
    • PuTTY is a piece of Windows-based client software used for remote configuration and management. Visit the chiark website and download PuTTY from the home page.
    • You are advised to use PuTTY of the latest version to ensure a successful login.
    • This document uses PuTTY0.70 as an example.

Procedure

  1. Run PuTTY on the management terminal.

    The PuTTY Configuration dialog box is displayed, as shown in Figure 5-5.

    Figure 5-5 PuTTY Configuration

  2. Enter the management floating IP address or node management IP address in Host Name (or IP address). Use the default values for other parameters.
  3. Click Open.

    The PuTTY window is displayed. Then login as: is displayed, prompting you to enter a user name.

  4. In login as:, enter a user name, press Enter, enter the password, and press Enter.
  5. Optional: Run the su - root command to switch to user root.

    To ensure account security, you are advised to change the initial password upon the first login after the software installation and periodically update the password.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081424

Views: 1569

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next