No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionStorage 8.0.0 Software Installation Guide 02

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Switches

Configuring Switches

This section describes the switch configuration requirements and how to configure switches.

Table 2-18 lists the switch configuration requirements.

Table 2-18 Switch configuration requirements

Type

Configuration Requirement

Storage switch

  • Multiple switches are stacked.
  • In the RoCE network, VLANs and flow control need to be configured.
  • If the storage network port is set to bond2 or bond4, you need to configure trunks.
  • Configure the IP address of the management network port on a switch.

Management switch

Create a VLAN and configure a management plane gateway on VLANIF.

Translation
Download
Updated: 2019-07-12

Document ID: EDOC1100081424

Views: 1781

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next