Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting the Power Grid Scheduling Signal Cable
Cable Connection
The following figure shows the cable connections between the inverter and the Ripple Control Device.
Figure 5-29 Cable connection
![]()
Procedure
- Connect the signal cable to the signal cable connector.Figure 5-30 Installing the cable
- Connect the signal cable to the COM port.Figure 5-31 Securing the signal cable connector
