Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Installing the Smart Dongle
Procedure
- If you prepared a WLAN-FE Smart Dongle or 4G Smart Dongle configured with a SIM card, skip this step.
- If you prepared a Smart Dongle without a SIM card, you need to prepare a standard SIM card (size: 25 mm x 15 mm) with the capacity greater than or equal to 64 KB.
- When installing the SIM card, determine its installation direction based on the silk screen and arrow on the card slot.
- When being pressed into place, the SIM card will be locked, which means that the card is installed correctly.
- To remove the SIM card, push it inwards. Then the SIM card springs out automatically.
- When reinstalling the WLAN-FE Smart Dongle or 4G Smart Dongle, ensure that the buckle springs back in place.
- 4G Smart DongleFigure 5-16 Installing the 4G Smart Dongle
- WLAN-FE Smart Dongle (WLAN Communication)Figure 5-17 Installing the WLAN-FE Smart Dongle (WLAN Communication)
- WLAN-FE Smart DongleDongle (FE Communication)Figure 5-18 Installing the WLAN-FE Smart Dongle (FE Communication)
There are two types of Smart Dongle involved in this document:
- WLAN-FE Smart Dongle: SDongleA-05
- 4G Smart Dongle: SDongleA-03
For details, see the quick guide that is delivered with the Smart Dongle.
