Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Dry Contact Scheduling Parameters
Scenario 1: Smart Dongle Networking Scenario
Prerequisites
You have logged in to the app as installer. The initial password is 00000a. Use the initial password upon first power-on and change it immediately after login. To ensure account security, change the password periodically and keep the new password in mind. Not changing the initial password may cause password disclosure. A password left unchanged for a long period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In these cases, the user is liable for any loss caused to the PV plant.
Procedure
- Set dry contact scheduling parameters.
Set Dry contact scheduling to
, and set Active power control and Reactive power control.
Figure B-1 Setting dry contact scheduling parameters
, and set 
Scenario 2: SmartLogger1000A Networking Scenario
See the SmartLogger1000A User Manual.
You can scan the QR code to obtain it.
