No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) User Manual

This document describes the SUN2000-175KTL-H0,SUN2000-185KTL-INH0, and SUN2000-185KTL-H1 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074671, 01074684, 01074687
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
System Power-Off

System Power-Off


  • If two inverters share the same AC switch on the AC side, power off the two inverters.
  • After the inverter powers off, the remaining electricity and heat may still cause electric shocks and body burns. Therefore, put on personal protective equipment (PPE) and begin servicing the inverter fifteen minutes after power-off.


  1. Run a shutdown command on the SUN2000 app, SmartLogger, or network management system (NMS).

    For details, see the user manual of the corresponding product.

  2. Turn off the AC switch between the inverter and the power grid.
  3. Set the three DC switches to OFF.
Updated: 2019-09-21

Document ID: EDOC1100083285

Views: 7564

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next