Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting Password
- Check that the AC and DC sides of the inverter are both powered on, and indicators
and
are steady green or blinking slowly for more than 3 minutes.
- Turn off the AC switch, set the DC SWITCH at the bottom of the inverter to OFF, and wait until all LED indicators on the inverter panel turn off.
- Complete the following operations within 4 minutes:
- Turn on the AC switch and wait for about 90s or until the inverter indicator
blinks.
- Turn off the AC switch and wait about 30s or until all LED indicators on the inverter panel turn off.
- Turn on the AC switch and wait for about 90s or until the inverter indicator
blinks.
- Turn on the AC switch and wait for about 90s or until the inverter indicator
- Log in to the app and reset the password within 10 minutes. (If no operation is performed within 10 minutes, all parameters of the inverter remain unchanged.)
and 
are steady green or blinking slowly for more than 3 minutes.
blinks.
blinks.
- SUN2000HA V300R001C00SPC133 and later versions support password reset.
- You are advised to reset the password in the morning or at night when the solar irradiance is low.