No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) User Manual

This document describes the SUN2000-175KTL-H0,SUN2000-185KTL-INH0, and SUN2000-185KTL-H1 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074671, 01074684, 01074687
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Crimping an OT or DT Terminal

Crimping an OT or DT Terminal

Requirements for the OT or DT Terminal

  • If a copper cable is used, use a copper wiring terminal.
  • If a copper-clad aluminum cable is used, use copper wiring terminals.
  • If an aluminum alloy cable is used, use copper to aluminum adapter wiring terminals, or aluminum wiring terminals along with copper.

Crimping an OT or DT Terminal

  • Pay attention not to scratch the core wire when stripping a cable.
  • The cavity formed after the conductor crimp strip of the OT or DT terminal is crimped must wrap the core wires completely. The core wires must contact the OT or DT terminal closely.
  • Wrap the wire crimping area with a heat shrink tubing or PVC insulation tape. The heat shrink tubing is used as an example.
  • When using a heat gun, protect devices from being scorched.
Figure 5-1 Crimping an OT terminal

(1) Cable

(2) Core

(3) Heat shrink tubing

(4) OT terminal

(5) Hydraulic pliers

(6) Heat gun

Figure 5-2 Crimping a DT terminal

(1) Cable

(2) Core

(3) Heat shrink tubing

(4) DT terminal

(5) Hydraulic pliers

(6) Heat gun

Download
Updated: 2019-09-21

Document ID: EDOC1100083285

Views: 7467

Downloads: 623

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next