Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Removing the SUN2000
Before removing the SUN2000, disconnect both AC and DC connections.
Perform the following operations to remove the SUN2000:
- Disconnect all cables from the SUN2000, including RS485 communications cables, DC input power cables, AC output power cables, and PGND cables.
- Remove the SUN2000 from the mounting bracket.
- Remove the mounting bracket.