No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) User Manual

This document describes the SUN2000-175KTL-H0,SUN2000-185KTL-INH0, and SUN2000-185KTL-H1 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074671, 01074684, 01074687
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Check Before Power-on

Check Before Power-on

  1. The inverter is installed correctly and securely.
  2. Check that the DC switches and downstream AC output switch are OFF.
  3. Check that all ground cables are connected securely and reliably.
  4. All AC output power cables are connected correctly and securely, without open circuits or short circuits.
  5. All DC input power cables are connected correctly and securely, without open circuits or short circuits.
  6. The communications cable is connected correctly and securely.
  7. Check that the maintenance compartment interior is clean and tidy, without foreign matter.
  8. The maintenance compartment door is closed and the door screws are tightened.
  9. Idle DC input terminals are sealed.
  10. Idle USB ports are plugged with waterproof plugs.
Download
Updated: 2019-09-21

Document ID: EDOC1100083285

Views: 7330

Downloads: 613

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next