Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing the Inverter
Preparing for the Installation
Before installing the inverter, take it out from the packing case and move it to the installation position.
Handles are packed in a fitting bag and are not delivered with the inverter.
Figure 4-11 Taking out and moving the inverter
![]()
- Move the inverter with the help of other three persons or using an appropriate transportation tool.
- Do not place the inverter with its wiring terminals at the bottom contacting the floor or any other objects because the terminals are not designed to bear the weight of the inverter.
- When you need to temporally place the inverter on the ground, use foam, paper, or other protection material to prevent damage to its cover.
- Do not lift or hoist the inverter using the bottom holes of the handles to prevent the handles from cracking.
Figure 4-12 Lifting positions
![]()
Installing the Inverter
- Optional: Install screws for locking DC switches.
For the model used in Australia, perform this step to meet the local standards.
Figure 4-13 Install screws for locking DC switches - Mount the inverter on the mounting bracket.
- Tighten the two screws at the bottom of the inverter.Figure 4-14 Installation
Supplementary Notes
If the inverter is installed in a high position, you can hoist it.
Figure 4-15 Hoisting the inverter
![]()
