No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) User Manual

This document describes the SUN2000-175KTL-H0,SUN2000-185KTL-INH0, and SUN2000-185KTL-H1 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074671, 01074684, 01074687
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Inverter Storage

Inverter Storage

The following requirements should be met if the inverter is not put into use directly:

  • Put the inverter in the original package. Keep the desiccant and seal it using the adhesive tape.
  • Proper storage temperature and humidity are required.

  • The inverter should be stored in a clean and dry place and be protected from dust and water vapor corrosion.
  • A maximum of four inverters can be stacked.
  • Regular inspection is required during the storage. Replace the packing materials as necessary.
  • If the inverter has been stored for a long time, inspections and tests should be conducted by qualified personnel before it is put into use.
Updated: 2019-09-21

Document ID: EDOC1100083285

Views: 7287

Downloads: 612

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next