No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1) User Manual

This document describes the SUN2000-175KTL-H0,SUN2000-185KTL-INH0, and SUN2000-185KTL-H1 in terms of their installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074671, 01074684, 01074687
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Replacing the Crimping Module

(Optional) Replacing the Crimping Module

Procedure

NOTE:

If the AC output power cable has a single core, replace the crimping module.

  1. Replace the crimping module.

    Figure 5-5 Replacing the crimping module

Download
Updated: 2019-09-21

Document ID: EDOC1100083285

Views: 7430

Downloads: 617

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next