Storage Array

SystemReporter User Guide

OceanStor 5000, 5000F, 6000 and 6000F V5 Series V500R007C50

This document is applicable to OceanStor 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5 and 6800F V5. This document describes how to download and install OceanStor SystemReporter, and how to use SystemReporter and troubleshoot the common issues.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

Storage Array

On SystemReporter, you can view the historical performance view of storage arrays. In addition, you can export and save the historical performance view to analyze performance indicators of storage arrays.

Prerequisites

Before viewing monitoring data, ensure that Collection Switch has been enabled. If Collection Switch has not been enabled, choose System > System Configuration > Registration and Configuration and enable Collection Switch for the device whose monitoring data you want to view.
Save historical monitoring data on the device has been enabled. If it has not been enabled, follow instructions in Configuring a Data Collection Policy to enable it.

Context

When a storage system is restarted upon a controller failure or recovery, one sampling data may be lost in the historical monitoring data curve of arrays and controllers in SystemReporter.

Procedure

Go to the monitoring page.
1. On the menu bar, click Monitoring.
2. In the left navigation tree, choose Device model > Device name(XXX.XXX.XXX.XXX) > Array.
  NOTE:
  Device model, Device name, and XXX.XXX.XXX.XXX indicate the model, name, and IP address of the device that has been registered.
3. In the function pane on the right, click Historical.
Optional: From the Indicator Template drop-down list, select an indicator template.
NOTE:
You can click Details after Indicator Template to view indicators of the current object type in the current indicator template.
Optional: Create an indicator template.
1. You can click Create after Indicator Template to create an indicator template.
  The Create Indicator Template dialog box is displayed.
2. Set Name and Description of the indicator template.
3. Click Add Indicator.
  The Add Indicator dialog box is displayed.
4. Select indicators that you want to add to the indicator template and click OK.
Optional: From the statistical period drop-down list, select a statistical period.
NOTE:
If Custom is selected, set the start time and end time for the historical performance view. The start time cannot be earlier than 1 year before.
In the function pane on the right, check the indicator view.

Follow-up Procedure

In the function pane on the right, you can perform operations described in Table 4-36.

Table 4-36 Related operations

Operation	Procedure	Description
Show/Hide	Click indicators or object names under the horizontal coordinate of the monitoring view.	Show or hide the current indicator or object curve.
Display performance views in two columns.	Click .	Display performance views of all indicators in two columns.
Display performance views in a single column.	Click .	Display performance views of all indicators in a single column.
Export	Click Export.	Export historical performance monitoring data. NOTE: The performance data can be exported to a PDF, HTML, XLS or CSV file.
Save to Favorites.	Click Favorites. In the Favorites dialog box, configure Name. NOTE: The name contains a maximum of 32 characters. The name can contain only digits, letters, underscores(_), and hyphens(-), and must start with a letter or underscore(_). Click OK.	Save the performance curves of indicators to Favorites Folder in Home.
Save Layout	Click .	Store the layout after locations of indicators on the page are changed. NOTE: If indicators in the indicator template change, the layout will be reset to its initial status.

Download

Updated: 2019-06-11

Document ID: EDOC1100087246

Downloads: 97

Average rating:

This Document Applies to these Products

Reminder