Remote Replication

SystemReporter User Guide

OceanStor 5000, 5000F, 6000 and 6000F V5 Series V500R007C50

This document is applicable to OceanStor 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5 and 6800F V5. This document describes how to download and install OceanStor SystemReporter, and how to use SystemReporter and troubleshoot the common issues.

Rate and give feedback:

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).

Remote Replication

By monitoring performance indicators of remote replications and cloud remote replications, SystemReporter obtains real-time performance statistics and presents them as a report. Then you can monitor the running status of remote replications and cloud remote replications in the most recent hour on SystemReporter.

Prerequisites

Before viewing monitoring data, ensure that Collection Switch has been enabled. If Collection Switch has not been enabled, choose System > System Configuration > Registration and Configuration and enable Collection Switch for the device whose monitoring data you want to view.

Precautions

If choose Remote Replication, only statistics about performance indicators of asynchronous remote replications can be collected, and the statistics can be viewed only on the primary storage system.

Procedure

Go to the monitoring page.
1. On the menu bar, click Monitoring.
2. In the left navigation tree, choose Device model > Device name(XXX.XXX.XXX.XXX) > Remote Replication.
  NOTE:
  Device model, Device name, and XXX.XXX.XXX.XXX indicate the model, name, and IP address of the device that has been registered.
3. In the function pane on the right, click Real Time.
- If Set Monitoring Options is not displayed in the function pane, perform steps 2 to 5.
- If Set Monitoring Options is displayed in the function pane, perform steps 6 to 8.
Optional: From the Indicator Template drop-down list, select an indicator template.
NOTE:
You can click Details after Indicator Template to view indicators of the current object type in the current indicator template.
Optional: Create an indicator template.
1. You can click Create after Indicator Template to create an indicator template.
  The Create Indicator Template dialog box is displayed.
2. Set Name and Description of the indicator template.
3. Click Add Indicator.
  The Add Indicator dialog box is displayed.
4. Select indicators that you want to add to the indicator template and click OK.
Set display objects.
1. Click after Display Rules.
  The Customize Display Items dialog box is displayed.
  NOTE:
  Click . The latest object information is displayed.
2. In the available object area, select the objects that you want to display and click .
3. Click OK.
In the function pane on the right, check the indicator view.
In the function pane, click Set Monitoring Options.
The Set Monitoring Options dialog box is displayed.
Select monitoring objects and monitoring indicators.
1. In the Step1: Select monitoring objects area, select desired monitoring objects and click .
2. In the Step2: Select monitoring indicators area, select desired monitoring indicators.
3. Select Immediately start monitoring. Otherwise, after completing configurations on Set Monitoring Options, click Start Monitoring on the monitoring page.
4. Click OK.
In the function pane on the right, check the indicator view.

Follow-up Procedure

In the function pane on the right, you can perform operations described in Table 4-19.

Table 4-19 Related operations

Operation	Procedure	Description
Show/Hide	Click indicators or object names under the horizontal coordinate of the monitoring view.	Show or hide the current indicator or object curve.
Display performance views in two columns.	Click .	Display performance views of all indicators in two columns.
Display performance views in a single column.	Click .	Display performance views of all indicators in a single column.
Show multiple objects in one column.	Click . Beside the performance line graph, click .	Display performance views of all indicators in a single column. Each view compares one performance indicator of multiple objects.
Show one object in one column.	Click . Beside the performance line graph, click .	Display performance views of all indicators in a single column. Each view shows the performance indicators of one object only.
Export	Click Export.	Export real-time performance monitoring data. NOTE: The performance data can be exported to a PDF, HTML, XLS or CSV file.
Save Layout	Click .	Store the layout after locations of indicators on the page are changed. NOTE: If indicators in the indicator template change, the layout will be reset to its initial status.

Download

Updated: 2019-06-11

Document ID: EDOC1100087246

Downloads: 97

Average rating:

This Document Applies to these Products

Reminder