No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(100KTL, 110KTL, 125KTL) Series User Manual

This document describes the SUN2000-125KTL-M0,SUN2000-110KTL-M0,SUN2000-100KTL-M0,SUN2000-100KTL-M1 and SUN2000-100KTL-INM0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074693, 01074694, 01074695, 01074695-001 and 01074695-002.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Product Appearance

Product Appearance


Figure 2-6 Appearance

(1) Panel

(2) LED indicators

(3) Maintenance compartment door

(4) Mounting bracket

(5) External fan tray

(6) DC input terminal group 1 (PV1–PV8, controlled by DC SWITCH 1)

(7) DC switch 1 (DC SWITCH 1)

(8) DC input terminal group 2 (PV9–PV14, controlled by DC SWITCH 2)

(9) DC switch 2 (DC SWITCH 2)

(10) DC input terminal group 3 (PV15–PV20, controlled by DC SWITCH 3)

(11) DC switch 3 (DC SWITCH 3)

(12) Ventilation valve

(13) USB port (USB)

(14) Communications port (COM)

(15) Hole for the AC output power cable

(16) Hole for the tracking system power cable


Figure 2-7 Dimensions

Wiring Area

Figure 2-8 Wiring port of a 3-pin model (SUN2000-125KTL-M0)

(1) DC input terminals

(2) RS485 port

(3) Ground point on the enclosure

(4) AC terminal block (3-pin)

Figure 2-9 Wiring port of 4-pin models (SUN2000-110KTL-M0, SUN2000-100KTL-M0, SUN2000-100KTL-M1, and SUN2000-100KTL-INM0)

(1) DC input terminals

(2) RS485 port

(3) Ground point on the enclosure

(4) AC terminal block (4-pin)

Updated: 2019-12-25

Document ID: EDOC1100087908

Views: 5561

Downloads: 667

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next