Tools
Category |
Tool |
|||
|---|---|---|---|---|
Installation tools |
Hammer drill |
Drill bit (Ф14 mm and Ф16 mm) |
Insulated torque socket wrench (including an extension bar ≥ 50 mm) |
Phillips insulated torque screwdriver |
Flat-head insulated torque screwdriver |
Diagonal pliers |
Wire strippers |
Rubber mallet |
|
Utility knife |
Cable cutter |
Crimping tool Model: H4TC0003 Manufacturer: AMPHENOL (For Amphenol Helios H4 connectors only) |
Crimping tool Model: PV-CZM-22100 Manufacturer: Staubli (For Staubli MC4 connectors only) |
|
Open-end wrench Model: H4TW0001 Manufacturer: AMPHENOL (For Amphenol Helios H4 connectors only) |
Open-end wrench Model: PV-MS-HZ Manufacturer: Staubli (For Staubli MC4 connectors only) |
Multimeter (DC voltage measurement range ≥ 1100 V DC) |
Marker |
|
Measuring tape |
Level |
Hydraulic pliers |
Heat shrink tubing |
|
Heat gun |
Cable tie |
Scissors |
RJ45 crimping tool |
|
Vacuum cleaner |
Insulation resistance tester (Output voltage > 1500 V) |
- |
- |
|
Personal protective equipment (PPE) |
Insulated gloves |
Safety goggles |
Dust mask |
Work shoes |
Safety helmet |
Reflective vest |
Protective gloves |
- |
|
