Technical Specifications

Maximum efficiency

≥ 99.0%

≥ 98.6%

≥ 98.6%

≥ 98.6% (380 V/400 V) and ≥ 98.8% (480 V)

≥ 98.6% (415 V) and ≥ 98.8% (480 V)

≥ 98.6% (380 V/400 V) and ≥ 98.8% (480 V)

Chinese efficiency

≥ 98.4%

≥ 98.2%

≥ 98.2%

-

-

-

European efficiency

-

-

-

≥ 98.4% (380 V/400 V) and ≥ 98.6% (480 V)

≥ 98.4% (415 V) and ≥ 98.6% (480 V)

≥ 98.3% (380 V/400 V) and ≥ 98.4% (480 V)

Maximum input voltage^a

1100 V

Operating voltage range^b

200–1000 V

Minimum startup voltage

200 V

Full-load MPPT voltage range

625–850 V

540–800 V

540–800 V

540–800 V (380 V/400 V) and 625–850 V (480 V)

540–800 V (415 V) and 625–850 V (480 V)

540–800 V (380 V/400 V) and

625–850 V (480 V)

Rated input voltage

750 V

600 V

600 V

570 V (380 V), 600 V (400 V) and 720 V (480 V)

620 V (415 V) and 720 V (480 V)

600 V (380 V/400 V) and 720 V (480 V)

Maximum short-circuit current (per MPPT)

40 A

Maximum backfeed current to the PV array

0 A

Number of inputs

20

Number of MPP trackers

10

Note a: The maximum input voltage is the upper threshold of the DC voltage. If the input voltage exceeds the threshold, the solar inverter may be damaged.

Note b: If the input voltage is beyond the operating voltage range, the solar inverter cannot work properly.

Rated active power

125 kW

110 kW

100 kW

100 kW

100 kW

75 kW

Maximum apparent power

137.5 kVA

121 kVA

110 kVA

110 kVA

110 kVA

75 kVA

Maximum active power (cosφ = 1)

137.5 kW

121 kW

110 kW

110 kW

110 kW

75 kW

Rated output voltage^a (phase voltage/line voltage)

288 V/500 V, 3 W + PE

220 V/380 V and 230 V/400 V, 3 W + (N)^b + PE

220 V/380 V, 230 V/400 V, 3 W + (N)^b + PE

220 V/380 V, 230 V/400 V and 277 V/480 V, 3 W + (N)^b + PE

240 V/415 V and 277 V/480 V, 3 W + (N)^b + PE

220 V/380 V, 230 V/400 V and 277 V/480 V, 3 W + (N)^b + PE

Rated output current

144.4 A

167.2 A (380 V) and 158.8 A (400 V)

152.0 A (380 V) and 144.4 A (400 V)

152.0 A (380 V), 144.4 A (400 V) and 120.3 A (480 V)

139.2 A (415 V) and 120.3 A (480 V)

113.6 A (380 V),

108.6 A (400 V) and 90.25 A (480 V)

Rated grid frequency

50 Hz

50 Hz/60 Hz

50 Hz/60 Hz

50 Hz/60 Hz

50 Hz/60 Hz

50 Hz/60 Hz

Maximum output current

160.4 A

185.7 A (380 V) and 176.4 A (400 V)

168.8 A (380 V) and 160.4 A (400 V)

168.8 A (380 V), 160.4 A (400 V) and 133.7 A (480 V)

154.6 A (415 V) and 133.7 A (480 V)

113.6 A (380 V), 108.6 A (400 V) and 90.25 A (480 V)

Power factor

0.8 leading and 0.8 lagging

Maximum total harmonic distortion (rated power)

< 3%

Note a: The rated output voltage is determined by Grid code, which can be set on the SUN2000 app, SmartLogger, or NMS.

Note b: You can determine whether to connect the neutral wire to the SUN2000-110KTL-M0, SUN2000-100KTL-M0, SUN2000-100KTL-M1, SUN2000-100KTL-INM0, or SUN2000-75KTL-M1 based on the application scenario. If no neutral wire is used, set Output mode to Three-phase three-wire. If the neutral wire is used, set the Output mode to Three-phase four-wire.

AFCI

-

Optional

-

-

Input DC switch

Supported

Anti-islanding protection

Supported

Output overcurrent protection

Supported

Input reverse connection protection

Supported

PV string fault detection

Supported

DC surge protection

Supported

AC surge protection

Supported

Insulation resistance detection

Supported

Residue current monitoring unit (RCMU)

Supported

Overvoltage category

PV II/AC III

Display

LED indicators, WLAN module + app, Bluetooth module + app, USB data cable + app

Communication

MBUS/RS485

RS485

MBUS/RS485

Dimensions (W x H x D)

1035 mm×700 mm×365 mm

Net weight

≤ 81 kg

≤ 90 kg

Operating temperature

–25ºC to +60ºC

Cooling mode

Intelligent air cooling

Highest operating altitude

4000 m

Relative humidity

0%–100% RH

Input terminal^[1]

Amphenol Helios H4

Output terminal

Crimping module + OT/DT terminal

IP rating

IP66

Topology

Transformerless

Note [1]: Some devices use Staubli MC4 connectors.