No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


SUN2000-(100KTL, 110KTL, 125KTL) Series User Manual

This document describes the SUN2000-125KTL-M0,SUN2000-110KTL-M0,SUN2000-100KTL-M0,SUN2000-100KTL-M1 and SUN2000-100KTL-INM0 in terms of its installation, electrical connections, commissioning, maintenance, and troubleshooting. BOM number: 01074693, 01074694, 01074695, 01074695-001 and 01074695-002.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Exporting Configurations

Exporting Configurations


  1. Click Inverter Command Settings on the SUN2000 app to generate a boot script file, as shown in SUN2000 Maintenance Script.
  2. Import the boot script file to a PC.

    (Optional) The boot script file can be opened as a .txt file, as shown in Figure 7-47.
    Figure 7-47 Boot script file





    User name

    • Advanced user: engineer
    • Special user: admin



    The ciphertext varies depending on the login password of the SUN2000 app.


    Script validity period




    Different command settings can produce different commands.

    • Configuration export command: export param.
    • Configuration import command: import param.
    • Data export command: export log.
    • Upgrade command: upgrade.

  3. Import the boot script file to the root directory of a USB flash drive.
  4. Connect the USB flash drive to the USB port. The system automatically identifies the USB flash drive and executes all commands specified in the boot script file. View the LED indicator to determine the operating status.

    Verify that the ciphertext in the boot script file matches the login password of the SUN2000 app. If they do not match and you insert the USB flash drive for five consecutive times, the user account will be locked for 10 minutes.

    Table 7-20 LED indicator description

    LED Indicator



    Green off

    There is no operation with a USB flash drive.

    Blinking green slowly

    There is an operation with a USB flash drive.

    Blinking green fast

    An operation with a USB flash drive has failed.

    Steady green

    An operation with a USB flash drive is successful.

  5. Insert the USB flash drive into a computer and check the exported data.

    When the configuration export is complete, the boot script file and exported file are in the root directory of the USB flash drive.

Updated: 2019-12-25

Document ID: EDOC1100087908

Views: 5954

Downloads: 707

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next